APPSC Group-I Screening Test 2016 (Notification 36/2016) — General Studies & Mental Ability · Q 47
As per the Manual for Drought Management, 2016 published by the Union Ministry of Agriculture, an area which is classified as “chronically drought prone” receives mean annual rainfall which is less than
- (a) 450 mm
- (b) 500 mm
- (c) 750 mm
- (d) 900 mm
Official APPSC answer: (c)
Solution: The answer is (C): the Manual for Drought Management, 2016 sets the mean annual rainfall limit for a 'chronically drought prone' area at less than 750 mm. Option-by-option analysis • ❌ (A) 450 mm — 450 mm is below the Manual's cut-off. An area with less than 450 mm is certainly very dry and would qualify as drought-prone, but the Manual's stated threshold for 'chronically drought prone' is not 450 mm. • ❌ (B) 500 mm — 500 mm is also lower than the actual limit. It is a plausible distractor because it sounds like a strict dryland benchmark, but the Manual fixes the line at less than 750 mm, not 500 mm. • ✅ (C) 750 mm — The Manual for Drought Management, 2016 classifies an area as 'chronically drought prone' when its mean annual rainfall is less than 750 mm. This is the exact rainfall criterion keyed by the official answer. • ❌ (D) 900 mm — 900 mm is above the Manual's threshold. An are…
APPSC Group-I Screening Test 2016 (Notification 36/2016) — General Studies & Mental Ability · Q 48
Which of the following is not a parameter used by the The Crop Weather Watch Group constituted by Government of India to monitor the drought situation in the country ?
- (a) Meteorological parameters
- (b) Hydrological parameters
- (c) Agricultural parameters
- (d) Geological parameters
Official APPSC answer: (d)
Solution: The answer is (D): geological parameters are not used by the Crop Weather Watch Group, which monitors drought through meteorological, hydrological and agricultural indicators. Option-by-option analysis • ❌ (A) Meteorological parameters — Incorrect as the answer: meteorological parameters such as rainfall departure, dry-spell length and temperature are central to the Crop Weather Watch Group. Since they are used, they do not fit the question's 'not a parameter'. • ❌ (B) Hydrological parameters — Incorrect as the answer: hydrological parameters such as reservoir storage, river flow and groundwater levels are watched to assess water stress. They are a core part of drought monitoring. • ❌ (C) Agricultural parameters — Incorrect as the answer: agricultural parameters such as sowing progress, crop condition, soil moisture and irrigation coverage show how drought is hitting farming. The Grou…
APPSC Group-I Screening Test 2016 (Notification 36/2016) — General Studies & Mental Ability · Q 49
What is the cause of earthquakes in the region from the Himalayas to the Arakan Yoma ?
- (a) Collision of Pacific Plate and Indian Plate
- (b) Collision of Indian Plate and Tibetan Plate
- (c) Collision of Eurasian Plate and Indian Plate
- (d) Construction of dams on the Ganga and Brahmaputra
Official APPSC answer: (c)
Solution: The answer is (C): the Himalayan–Arakan Yoma belt is a convergent boundary where the northward-moving Indian Plate collides with the Eurasian Plate, and the released strain causes earthquakes. Option-by-option analysis • ❌ (A) — The Pacific Plate lies far to the east and is not colliding with the Indian Plate to build the Himalayas. Pacific Plate boundaries produce the Circum-Pacific 'Ring of Fire', not the Himalayan–Arakan Yoma belt. • ❌ (B) — There is no standard major 'Tibetan Plate' shown as colliding with India in this context. Tibet is a deformed part of the Eurasian Plate. The accepted cause is Indian–Eurasian convergence, not an Indian–Tibetan collision. • ✅ (C) — The Indian Plate moves northward and collides with the Eurasian Plate. This convergent boundary crumpled the crust into the Himalayas and continues into the Indo-Burman ranges/Arakan Yoma. Friction, strain build-up a…
APPSC Group-I Screening Test 2016 (Notification 36/2016) — General Studies & Mental Ability · Q 50
Out of the events given below, which is the most important cause of Tsunami ?
- (a) Fault movement on the sea floor
- (b) Underwater landslide
- (c) Underwater volcanic explosions
- (d) Underwater mining explosions
Official APPSC answer: (a)
Solution: The answer is (A): fault movement on the sea floor is the dominant cause because a sudden vertical slip displaces an enormous water column and starts an ocean-wide tsunami; the other processes are secondary, rare or too small. Option-by-option analysis • ✅ (A) Fault movement on the sea floor — A sudden slip along a submarine fault, especially a shallow-focus megathrust earthquake, vertically displaces the sea floor and lifts or drops a huge column of water. This is the most common and most important cause of major tsunamis; the 2004 Sumatra–Andaman and 2011 Tohoku tsunamis are classic examples. • ❌ (B) Underwater landslide — Underwater landslides can generate tsunamis, but they are usually local or regional and often secondary—many are triggered by the same earthquake. They are not the most important cause globally. • ❌ (C) Underwater volcanic explosions — Volcanic explosions and cald…
APPSC Group-I Screening Test 2016 (Notification 36/2016) — General Studies & Mental Ability · Q 56
For the purpose of reducing wind forces on the roof during a cyclone, the best roof architecture of a building, out of the options below is
- (a) Gable ended roof
- (b) Hip roof
- (c) Pyramidal roof
- (d) Flat roof
Official APPSC answer: (b)
Solution: The answer is (B): a hip roof slopes on all four sides with no vertical gable end, so it reduces the windward pressure and roof uplift that a cyclone can generate; the key treats this as the best of the listed standard roof forms. Option-by-option analysis • ❌ (A) Gable ended roof — A gable roof has two sloping sides and a vertical triangular gable-end wall. In a cyclone, wind strikes that flat gable end and the sharp eaves and ridge, creating high pressure on the wall and strong local suction over the roof. So uplift is higher; it is common but not the best for reducing wind forces. • ✅ (B) Hip roof — A hip roof slopes on all four sides and has no vertical gable end. Wind flows more smoothly over the four planes; the absence of a broad flat wall facing the wind cuts the high-pressure pocket and sharp-edge suction. A ridge remains, but among the listed conventional forms the key treat…